Zephyr AK7848ASX, AK7842ASX, AK7836ASX manual Cleaning and Filter Removal, Surface Maintenance

www.zephyronline.com

Cleaning and Filter Removal

SURFACE MAINTENANCE:

Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/scouring pads which will scratch and damage surface. Do not use products containing chlorine bleach or orange cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly using a micro fiber or clean cotton cloth and with grain.

Stainless Steel Baffle Filters

The stainless steel baffle filters are intended to trap residue and grease from cooking. Although the filters should never need replacing, they are required to be cleaned every 30 days or more often depending on cooking habits.

Filters may be placed in dishwasher at low heat or soaked in hot soapy water Dry filters and re-install before using hood.

Removing Baffle Filters

1.Push filter toward back of range hood using handles.

2.Pivot front of filter downward.

3. Remove filter by pulling away from hood.

Maintenance –

Replacing Baffle Filters
Hood Model:	Part No.	Qty. to Order.
AK7836ASX	50210009	3
AK7842ASX	50210009	3
AK7848ASX	50210009	4

! CAUTION: If this hood is installed in a salt water area (e.g. coast), rinse all surfaces once a week with clear water even if the hood is not used.

Wipe and dry completely after rinsing.

1

2

3

14