Patton electronic 29XX manual Call Trace syslogCallTrace, Maintenance

Access Server Administrators’ Reference Guide 21 • System Log

•authpriv(10)

•ftp(11)

•local0(16)

•local1(17)

•local2(18)

•local3(19)

•local4(20)

•local5(21)

•local6(22)

•local7(23)

Call Trace (syslogCallTrace)

Enabling this will activate the call tracing utility. This is a powerful debugging utility which will log every sin- gle function call and return. At the death of a box the call trace will be printed out and can be sent to tech sup- port. This utility will take a large amount of CPU power, therefore do not turn this feature on unless instructed to do so by technical support.

•disable(0)—Disable function call tracing.

•enable(1)—Enable function call tracing.

•dump(2)—Display function call tracing on the computer monitor.

Maintenance

This portion of the System Log—Modify window contains information described in the following section.

Maintain Flash Storage (syslogFlashClear)

Setting this variable to syslogFlashClear will cause the erasing of any system messages which have been saved in the Flash. On reading this variable, it will indicate if the syslog Flash is rejecting messages because it is full.

•syslogFlashOK(0)—Flash is accepting messages.

•syslogFlashFull(1)—Flash is rejecting messages because it is full. To empty the Flash PROM, click on the Set Factory Default Configuration button (refer to section “Immediate Actions” on page 18), then click on

Record Current Configuration.

•syslogFlashClear(2)—Erase system messages stored in Flash.

System Log—Modify 246