Patton electronic 29XX manual Local-Remote AC Comprsn diStatLocalToRemoteACComp

Access Server Administrators’ Reference Guide 7 • Dial In

Remote-Local PPP Protocol Comprsn (diStatRemoteToLocalProtComp)

Indicates whether the remote PPP entity will use protocol compression when transmitting packets to the local

PPPentity. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—PPP compression is disabled

•enabled(1)—PPP compression is enabled

Local-Remote AC Comprsn (diStatLocalToRemoteACComp)

Indicates whether the local PPP entity will use address and control compression (ACC) when transmitting packets to the remote PPP entity. This setting becomes active when the link is in the up—able to pass pack- ets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—ACC is disabled

•enabled(1)—ACC is enabled

Remote-Local AC Comprsn (diStatRemoteToLocalACComp)

Indicates whether the remote PPP entity will use address and control compression (ACC) when transmitting packets to the local PPP entity. This setting becomes active when the link is in the up—able to pass packets— operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—ACC is disabled

•enabled(1)—ACC is enabled

Transmit Frame Check Seq. Size (diStatTransmitFcsSize)

The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). The values are from 0 to 128.

Receive Frame Check Seq. Size (diStatReceiveFcsSize)

The size (in bits) of the frame check sequence (FCS) that the remote node will generate when sending packets to the local node. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). The values are from 0 to 128.

IP

This portion of the Dial In User Statistics window (see figure 38 on page 95) shows operational status and the type of IP compression used.

Dial In User Statistics window 97