Access Server Administrators’ Reference Guide

12 • Ethernet

 

 

Note Note that the speed settings indicated above could indicate that the device reached this speed duplex as a result of an auto-negotiated link, or from being forced into this link state.

PrimaryIPAddress (boxEtherAPrimaryIpAddress)

The Primary ethernet IP address.

PrimaryIpMask (boxEtherAPrimaryIpMask)

The primary ethernet IP subnet mask.

PrimaryIpFilters (boxEtherAPrimaryIpFilters)

Filters packets based on the filters assigned to the Primary IP address of the Ethernet port. Enter the Filter ID of a filter configured under Filter IP. Separate multiple filters using a comma (,).

SecondaryIpAddress (boxEtherASecondaryIpAddress)

The secondary ethernet IP address.

Note This address is not propagated via RIP.

SecondaryIpMask (boxEtherASecondaryIpMask)

The secondary IP ethernet IP subnet mask.

SecondaryIpFilters (boxEtherASecondaryIpFilters)

Filters packets based on the filters assigned to the Secondary IP address of the Ethernet port. Enter the Filter ID of a filter configured under Filter IP. Separate multiple filters using a comma (,).

Note Only outbound filters can be applied to the secondary Ethernet. Inbound fil- ters for the secondary Ethernet must be entered in the Primary IP Filter field.

Technique (boxEtherATechnique)

Turns ethernet port off and on. The remote access server must be reset for this setting to take effect.

disable(0)—ethernet port is disabled

static(1)—ethernet port is turned on. IP address(es) and mask(s) are obtained from data entered under the

Ethernet link.

Config

Indicates the specified fixed rate and duplex for the Ethernet interface.

auto(0)-- auto-negotiate the settings for the interface (default)

100M_full(1)-- force the interface to 100M & full duplex

100M_half(2)-- force the interface to 100M & half duplex

10M_full(3)-- force the interface to 10M & full duplex

10M_half(4)-- force the interface to 100M & half duplex

Ethernet Main Window

156

Page 156
Image 156
Patton electronic 29XX manual PrimaryIPAddress boxEtherAPrimaryIpAddress, PrimaryIpMask boxEtherAPrimaryIpMask, Config