Patton electronic 29XX manual Isdn Signaling Alarms linkSignalStatus, Snmp MIB definition

Access Server Administrators’ Reference Guide 22 • T1/E1 Link

ISDN Signaling Alarms (linkSignalStatus)

Note ISDN Signaling Alarms will only appear if the T1/E1 is configured as a PRI.

Figure 104. ISDN Signalling Alarms

•Class Resource—for future use

•Class Syntax—for future use

•Class State—for future use

•Class Unknown—for future use

•Q3 Close Anchor—indicates that the D channel is down

•Q3 Invalid Parameter—invalid parameter an information element for last call according to Q.931 specifi- cation

•Q3 Setup Anchor—invalid parameter in the ISDN Setup message according to Q.931 specification

•Q3 No stream Resource—Out of resources for last call

•Q3 Ie miss—mandatory information element missing for last call

Note Except for Q3 Close Anchor, all other parameters are used for debugging purposes.

Note Alarm will activate for 5 seconds after the call is received for errors registered on last call.

SNMP MIB definition

The SNMP MIB is defined as follows:

dsx1LineStatus OBJECT-TYPE

SYNTAX INTEGER (1..8191)

ACCESS read-only

STATUS mandatory

Alarms Present 256