Patton electronic 29XX manual Remote-Local AC Comprsn pppStatRemoteToLocalACComp

Access Server Administrators’ Reference Guide 23 • Sync PPP

•enabled(1)—ACC is enabled

Remote-Local AC Comprsn (pppStatRemoteToLocalACComp)

Indicates whether the remote PPP entity will use address and control compression (ACC) when transmitting packets to the local PPP entity. This setting becomes active when the link is in the up—able to pass packets— operational state. These are the available options:

•disabled(0)—ACC is disabled

•enabled(1)—ACC is enabled

Transmit Frame Check Seq. Size (pppStatTransmitFcsSize)

The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. This setting becomes active when the link is in the up—able to pass packets—operational state. The values are from 0 to 128.

Receive Frame Check Seq. Size (pppStatReceiveFcsSize)

The size (in bits) of the frame check sequence (FCS) that the remote node will generate when sending packets to the local node. This setting becomes active when the link is in the up—able to pass packets—operational state The values are from 0 to 128.

IP

This portion of the statistics window shows operational status and type of compression used.

Operational Status (pppIpOperStatus)

The current operational state of the interface. These are the available options:

•up(1)—able to pass packets

•down(2)—unable to pass packets

•testing(3)—in test mode and unable to pass packets

Local-Remote VJ Protocol Comprsn (pppIpLocalToRemoteCompProt)

The current operational state of the interface. These are the available options:

•up(1)—able to pass packets

•down(2)—unable to pass packets

•testing(3)—in test mode and unable to pass packets

Remote-Local VJ Protocol Comprsn (pppIpRemoteToLocalCompProt)

The IP compression protocol that the remote IP entity uses when sending packets to the local IP entity. The available settings are:

•none(1)—no compression

•vjTCP(2)—enabled

WAN Circuit CONFIGURATION window 287