Patton electronic 29XX manual Alarm Syslog Priority syslogAlarmPriority

Access Server Administrators’ Reference Guide 4 • Alarms

Alarm Syslog Priority (syslogAlarmPriority)

The SYSLOG priority of the alarm SYSLOG message. If the minimum priority for SYSLOG daemon (set under the System Log link) is less than this value, the SYSLOG daemon will receive the major or critical alarm SYSLOG message (prioritySystem has the highest priority; priorityVerbose the lowest).

•priorityVerbose(5)

•priorityDebug(10)

•priorityInfo(20)

•priorityOddity(40)

•priorityService(60)

•prioritySystem(80)

•priorityDisable(1000)

•priorityDisable(1000)

Alarm SNMP Trap IP 1 (alarmTrapIp0)

The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.

Alarm SNMP Trap IP 2 (alarmTrapIp1)

The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.

Alarm SNMP Trap IP 3(alarmTrapIp2)

The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.

Alarm SNMP Trap IP 4(alarmTrapIp3)

The IP address of a host system which is running the SNMP trap daemon. Critical and major alarm messages will be sent to the system. If set to 0.0.0.0 then no trap message will be sent in response to a major alarm.

Temperature Threshold(boxAlarmTemperature)

If the box registers a temperature greater than this temperature an alarm will be reported. Temperature is in degrees Celsius.

Modify Response—Configuring the alarm response system 28