Patton electronic 29XX State diactState, Duration diactSessionTime, Modulation diactModulation

Access Server Administrators’ Reference Guide 7 • Dial In

State (diactState)

As the call comes into the access server it can be in one of five states.

•Ringing—The call has been recognized by the access server and is in process of going off hook.

•Connecting—The unit has assigned a DSP to the incoming call and is now in the process of negotiation of the type of modulation—V.34, V.32, ISDN, or 56K.

•Authenticating—The access server is in the process of verifying the users passwords by using static or RADIUS authentication.

•Online—The access server has completed authentication and we are ready to access the Internet.

•Dead—The user has been disconnected and this message will go away after the linger time has expired.

•Bury—Kill the call and remove it from the dial-in main window.

Duration (diactSessionTime)

The number of seconds this call was/is active. Time in seconds the user has been connected.

Disconnect Reason (diactTerminateReason)

The reason a call was disconnected (refer to “Termination Reason (diactTerminateReason)” on page 91 for the complete list of reasons).

Modulation (diactModulation)

The modulation of the link:

•unknown(0)

•v21(1)—V.21 modulation

•v22(2)—V.22 modulation

•v32(3)—V.32 modulation

•v34(4)—V.34 modulation

•k56(5)—K56 Flex modulation

•x2(6)—X.2 modulation

•v90(7)—V.90 modulation

•v110(8)—V.110 modulation

•isdn64(9)—ISDN 64 modulation

•isdn56(10)—ISDN 56 modulation

•12tp(11)—12tp tunnelled multilink call

•phase2(20)—Phase 2, an advanced state of modulation in v34 and higher

•answerack(21)—acknowledgement phase of modulation

•V92(22)—V.92 modulation

•moh(23)—Modem is using V.92’s modem-on-hold feature

Dial In main window 56