Patton electronic 29XX manual Remote MRU diStatRemoteMRU, Local Multilink Mrru diStatLcpLocalMRRU

Access Server Administrators’ Reference Guide 7 • Dial In

Remote MRU (diStatRemoteMRU)

The current value of the MRU for the remote PPP entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98).

Local Multilink MRRU (diStatLcpLocalMRRU)

Multilink maximum receive reconstruction unit for the local device.

Remote Multilink MRRU (diStatLcpRemoteMRRU)

Multilink maximum receive reconstruction unit for the remote device.

LCP Authentication (LCPAuthOptions)

Authentication type used by the dial-in user. The following options are available:

•none(1)

•pap(2)

•chap(3)

•MSChapV1(4)

•MSChapV2(5)

•tacacs(6)—not currently implemented

•edp(7)

•ShivaPap(8)—not currently implemented

ACC Map (diStatLocalToPeerACCMap)

The current value of the ACC Map used for sending packets from the local modem to the remote modem. The local modem sends this character map to the remote peer modem to ensure that the data being transferred is interpreted correctly. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98).

Peer-Local ACC Map (diStatPeerToLocalACCMap)

The current value of the ACC Map used by the remote peer modem when transmitting packets to the local modem. The local modem sends this character map to the remote peer modem to ensure that the data being transferred is interpreted correctly. The remote peer modem combines its ACC Map with the map received from the local modem. This setting becomes active when the link is in the up—able to pass packets—opera- tional state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98).

Local-Remote PPP Protocol Comprsn (diStatLocalToRemoteProtComp)

Indicates whether the local PPP entity will use protocol compression when transmitting packets to the remote

PPPentity. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—PPP compression is disabled

•enabled(1)—PPP compression is enabled

Dial In User Statistics window 96