Patton electronic 29XX manual RIP Version 2 main window, Route Changes Made rip2GlobalRouteChanges

Access Server Administrators’ Reference Guide 18 • RIP Version 2

Introduction

The RIP Version 2 main window (see figure 90) describes routing information as defined by the Routing Information Protocol (RIP). All object identifiers described in this chapter comply with those contained in RFC 1389: RIP Version 2 MIB Extension.

\

Figure 90. RIP Version 2 window

Click on RIP Version 2 under the Configuration Menu to display the RIP Version 2 main window.

RIP Version 2 main window

The RIP Version 2 window describes routing information as defined by the Routing Information Protocol (RIP). The window also contains the following links:

•Statistics (xxx.xx.xxx.xxx)—Clicking on the link under the Address column displays the RIP Version 2 Sta- tus window (see “RIP Version 2 (Statistics)” on page 223) where you can view routing and update informa- tion for each subnet address

•Address—Clicking on this link displays the RIP Version 2 Configuration window (see “RIP Version 2— Configuration” on page 222). This window is where you can configure objects for each subnet address including authentication method, RIP Version 1 or Version 2 compatibility, and metric value.

Route Changes Made (rip2GlobalRouteChanges)

The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.

Responses Sent (rip2GlobalQueries)

The number of responses sent to RIP queries from other systems.

Address (rip2IfConfAddress)

The IP address of the interface on the access server.

Send (rip2IfConfSend)

The types of RIP packets the router sends on this interface.

•doNotSend (1)

Introduction 220