Patton electronic 29XX manual Local PPP Protocol Compression doStatLocalToRemoteProtComp

Access Server Administrators’ Reference Guide 8 • Dial Out

Local PPP Protocol Compression (doStatLocalToRemoteProtComp)

Indicates whether the local PPP entity will use protocol compression when transmitting packets to the remote

PPPentity. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—PPP compression is disabled

•enabled(1)—PPP compression is enabled

Remote PPP Protocol Compression (doStatRemoteToLocalProtComp

Indicates whether the remote PPP entity will use protocol compression when transmitting packets to the local

PPPentity. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—PPP compression is disabled

•enabled(1)—PPP compression is enabled

Local AC Compression (doStatLocalToRemoteACComp)

Indicates whether the local PPP entity will use address and control compression (ACC) when transmitting packets to the remote PPP entity. This setting becomes active when the link is in the up—able to pass packets —operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—ACC is disabled

•enabled(1)—ACC is enabled

Remote AC Compression (doStatRemoteToLocalACComp)

Indicates whether the remote PPP entity will use address and control compression (ACC) when transmitting packets to the local PPP entity. This setting becomes active when the link is in the up—able to pass packets— operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). These are the available options:

•disabled(0)—ACC is disabled

•enabled(1)—ACC is enabled

Local Frame Check Sequence size (doStatTransmitFcsSize)

The size of the Frame Check Sequence (FCS) in bits that the local node will generate when sending packets to the remote node. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). The values are from 0 to 128.

Remote Frame Check Sequence size (doStatReceiveFcsSize)

The size (in bits) of the frame check sequence (FCS) that the remote node will generate when sending packets to the local node. This setting becomes active when the link is in the up—able to pass packets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 98). The values are from 0 to 128.

Dial Out User Statistics Window 129