Patton electronic 29XX manual LCP AuthenticationpppStatLcpAuth, ACC Map pppStatLocalToPeerACCMap

Access Server Administrators’ Reference Guide 23 • Sync PPP

LCP Authentication(pppStatLcpAuth)

Authentication type used. The following options are available:

•none(1)

•pap(2)

•chap(3)

•MSChap(4)—not currently implemented

•tacacs(5)—not currently implemented

•edp(6)

•ShivaPap(7)—not currently implemented

ACC Map (pppStatLocalToPeerACCMap)

The current value of the ACC Map used for sending packets from the local server to the remote unit. The local unit sends this character map to the remote unit to ensure that the data being transferred is interpreted cor- rectly. This setting becomes active when the link is in the up—able to pass packets—operational State.

Peer-Local ACC Map (pppStatPeerToLocalACCMap)

The current value of the ACC Map used by the remote unit when transmitting packets to the local unit. The remote unit sends this character map to the local unit to ensure that the data being transferred is interpreted correctly. The local unit combines its ACC Map with the map received from the remote unit. This setting becomes active when the link is in the up—able to pass packets—operational state.

Local-Remote PPP Protocol Comprsn(pppStatLocalToRemoteProtComp)

Indicates whether the local PPP entity will use protocol compression when transmitting packets to the remote

PPPentity. This setting becomes active when the link is in the up—able to pass packets—operational state. These are the available options:

•disabled(0)—PPP compression is disabled

•enabled(1)—PPP compression is enabled

Remote-Local PPP Protocol Comprsn (pppStatRemoteToLocalProtComp)

Indicates whether the remote PPP entity will use protocol compression when transmitting packets to the local

PPPentity. This setting becomes active when the link is in the up—able to pass packets—operational state. These are the available options:

•disabled(0)—PPP compression is disabled

•enabled(1)—PPP compression is enabled

Local-Remote AC Comprsn(pppStatLocalToRemoteACComp)

Indicates whether the local PPP entity will use address and control compression (ACC) when transmitting packets to the remote PPP entity. This setting becomes active when the link is in the up—able to pass packets —operational state. These are the available options:

•disabled(0)—ACC is disabled

WAN Circuit CONFIGURATION window 286