Installation - Mounting the Range Hood
www.zephyronline.com
2. Secure the top support frame to the duct cover ceiling bracket by using the (4 type B) screws. Fig. 10
3. Position hole template on the ceiling paying attention that the arrow is po- sitioned on the same side as the range hood controls.
- Make 4 holes in the ceiling and drive in (3 type C) screws without completely tightening them. Pay attention not to in- sert the screw into the hole marked with an X on the hole template. Fig. 11
4. Lift the hood assembly to the cei- ling and align the top support fra- me and ceiling bracket with the (3) screws previously installed in the ceiling.
Rotate assembly slightly clockwise to lock in place.
Drive in the fourth screw (type C) and tighten the remaining 3 screws to secure the structure in place. Fig.11
- 16 -