Ins ta lla tion - Interna l B lower
www.zephyronline.com
ATTENTION
The following are intructions for installing internal blower model
The internal blower kit consists of the blower | 1. Remove existing screws from blower |
and capacitor box with wiring. | housing. |
2. Att ach capacitor box to blower housing | 3. Att ach motor connector to capacitor box |
using the removed screws. | connector. |
4. P osition internal flange over blower | 5. Att ach (4) 1/2” 5x15mm screws and (4) |
housing. | 10mm washers to hold flange to blower |
| housing. |
8
