Zephyr CTP-E 48SX, CTP-E 60SX, CTP-E54SX manual On top of hood and secure with medium set screw

Ins ta lla tion - M ounting the Hood

www.zephyronline.com

Telescopic Rod Installation
1. Install telescopic rod (thicker end down) into coupler	Set
on top of hood and secure with medium set screw.	screws
Attach screw using provided tool.

2.Extend telescopic rod towards the ceiling and insert thin end of rod into ceiling coupler. Attach a medium set screw in the middle where the two rods attach to each other.

3.Attach medium set screw into the ceiling coupler to secure it in place. Repeat these steps for each telescopic rod.

Tool

	Set
	screw
Front	Back

Utensil Rail Installation

1.A ttach utensil rail to long side of hood canopy. A small hole has been pre-drilled into the canopy to provide a starting point to attach the first utensil rail post. After the first post is line up with the hole, gently slide the rest of the rail onto canopy. (note: be careful not to scratc h the stainless steel when per forming this step, this is why there is a star ter hole).

2.A ttach a short set screw into each post in order to hold utensil rail onto canopy. Do the same for the other side.

14