www.zephyronline.com
8.Fit the blower unit housing inside the cabinet through the bottom opening.
Check that fixing springs goes over the bottom panel..
Bottom
openingFixing
Bottomsprings panel
9.Apply two brackets (one per side) to the blower unit housing.........
Upper bracket |
....... lock in place (check that each bracket , once in
position, is flush to the front side of the blower unit housing) tighten the side fixing screws (two per brackets) and, from the inside of the hood, fix with one screw each then .......
Side fixing screws | Installation |
|
Upper + lower bracket definitive fixing screws
.......apply the two bigger brackets (lower brackets)
under the first two and....
Lower bracket |
11
