Zephyr ES1-E30AB, ES1-E30AS, ES1-30AW installation instructions Prepare The Installation

3. PREPARE THE INSTALLATION

Make sure the following items are included:

-Hood

-Filters (2)

-Adapter/damper assembly 3¼’’ x 10’’ (located inside the hood, under the bottom panel)

-Compact fluorescent lamps (120 V, 13 W, PLC13, 2700 K with G24q-1 base)

-Bag of parts including:

(1)wire clamp, (5) 1/2’’ double thread screws, (2) wire connectors and (6) no. 6 x 1/2’’ screws

Parts sold separately:

- Transition 3¼”x 10” to 6” round (optional, for 6” round ducts installation only)

CAUTION

When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.

NOTE: If the bottom of the cupboard is recessed, attach wood strips (not included), as shown beside, in order to properly install the range hood under the cabinet. The wood strips must be as thick as recess.

23 8 ”

HO0002A

Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the direction of discharge chosen.

See figures below.

HORIZONTAL DISCHARGE: VERTICAL DISCHARGE:

				CABINET BOTTOM
					C
					L
C				A	10½”
	L
	111 8 ”			3¾”	1¼”
A									1½”
3½”		7 8 ”		5¼”	5¼”	3	8	”	B
			HD0151A	¾”
5¼”	5¼”	B
		1¼” dia.
HD0150A
		- 5 -