Zephyr ES1-E30AS, ES1-30AW, ES1-E30AB installation instructions Fluorescent Lamps, Cleaning

Models: ES1-E30AB ES1-30AW ES1-E30AS

1 13
Download 13 pages 33.38 Kb
Page 9
Image 9
9. FLUORESCENT LAMPS

9. FLUORESCENT LAMPS

!WARNING

This product contains fluorescent lamps containing mercury. Dispose of appropriately, according to local laws and requirements.

This range hood must use compact fluorescent lamps (120 V, 13 W, PLC13, 2700 K with G24q-1 base) (included).

!WARNING

In order to prevent the risk of personal injury, the fluorescent tubes must be cooled down before removing them.

NOTE: The range hood is shipped with both fluorescent lamps packed behind the light diffuser.

1.To access fluorescent lamps, remove the light diffuser by pushing on its both tabs and pulling it down.

2.To install the fluorescent lamps, slide their 4 prongs into their corresponding holes in their socket until secured. Reinstall the light diffuser.

1

2

HO0098

To remove fluorescent lamps, remove the light diffuser and pull fluorescent lamps out of their socket.

NOTE: Some fluorescent lamps may produce a yellowish lighting on first usages. This temporary effect will disappear by itself.

10. CLEANING

The grease filters, bottom panel, intake ring (A) and blower wheel (B) should be cleaned frequently. Use a warm detergent solution. The grease filters, intake ring and blower wheel are dishwasher safe.

A

B

HD0220

NOTE: Some minerals, when in contact with dishwasher soap additives, may cause filters discoloration. This discoloration is not covered by the warranty.

- 9 -

Page 9
Image 9
Zephyr ES1-E30AS, ES1-30AW, ES1-E30AB installation instructions Fluorescent Lamps, Cleaning