Zhone Technologies 4000E installation instructions Subscriber Lines

Subscriber Lines

4Pull the hook-and-loop fastener strap upward, making sure that it is snug against the connector, then pull the strap back down, such that the hook-and-loop fastener layers stick to one another across the top of the connector.

05-17842

5Tuck the tab at the end of the strap down between the connector frames so that it is out of the way of other connections.

05-17843

6Screw the right side of the RJ21 cable connector into the jack screw on the right side of the RJ21 connector frame on the chassis. Note: If you are using a 120 or 180 degree cable, both the right and left sides of the cable connector should be screwed to the RJ21 connector frame on the chassis.

05-17844

IPD4-A2-ZZ40-20 4000E IP Broadband Loop Carrier Installation Instructions 15