In the Privacy Configuration window, click the Authentication Mode drop-down arrow and select WPA2.
At Encryption Mode, accept the default AES (Advanced Encryption Standard)

1

2

3 In the IEEE 802.1X Authentication area, note that the check box marked Enable IEEE 802.1X authentication for this network is selected. With IEEE 802.1X authentication, each wireless device (client) sends a signal to the wireless access point, which in turn sends the signal to the RADIUS server. The server determines whether or not the client is allowed to join the network.

4 Click the EAP (Extensible Authentication Protocol) Type

drop-down list and select an authentication protocol:

•PEAP (Protected Extensible Authentication Protocol). This is the default. With PEAP, you can select from two authentication extensions:

MS-CHAPV2.Microsoft’s version of CHAP (Challenge-Handshake Authentication Protocol (default)

GTC

•TLS (Transport Layer Security). There are no authentication extension options with TLS.

Chapter 2: Setting Security

19