Play for Patches Selecting

Selecting Patches for Play

To try out the 504 II, we recommend that you simply play your instrument while switching patches. This will let you quickly see what the 504 II can do.

Power-on

When using the 504 II on batteries, plug a shielded cable with mono phone plug into the INPUT jack of the 504 II.

When using the 504 II with the AC adapter, plug the adapter into the outlet and plug the cable from the adapter into the DC 9V jack on the 504 II.

Turn on the guitar amplifier and adjust the volume to a suitable position.

Set 504 II to play mode

When the [PLAY/EDIT] selector is set to a different position, set it to "PLAY".

Selecting Patches for Play

To directly switch

Selecting

the bank

You can use the [+]/[-] keys to directly

switch among the banks A - F.

Patches

To adjust the master

for

volume

Play

Keep both [+]/[-] keys depressed

 

for more than 1 second.

 

While the master volume setting is

 

Bank Patch number

The currently selected bank and patch number are shown on the display.

Immediately after turning on power to the 504 II, the unit will be in play mode also if the [PLAY/EDIT] selector is set to a different position.

shown, pressing the [+] or [-] key

changes the setting.

The setting range is 0 - 50. When the unit

is turned off and on again, the setting will

be reset to 40.

When using headphones, the master volume setting can be used to adjust the listening volume.

Switch patches

To switch patches in play mode, use the []/[] foot switches.

8 ZOOM 504 II ACOUSTIC

ZOOM 504 II ACOUSTIC 9