STEP5 Press the [REC] key.

 

The [REC] key LED and [PLAY] key LED light up, indicating that the

STEP REC

RT-123 is ready for recording.

 

To enter a note, press the pad corresponding to the desired sound. To enter a rest, STEP6 press the [REPEAT/STEP] key.

For example, tapping the [KICK] pad will enter a bass drum note (the [KICK] pad LED flashes briefly). The current position of the pattern then advances by one unit. The tapping intensity will of course also be recorded.

When the end of the pattern is reached, the recording loops back to the beginning and continues, allowing you to add to the recording as often as desired.

The display shows the current position in the pattern

HINT (measure/beat).

PAD

or

REPEAT/STEP

To erase a sound, use the [REPEAT/STEP] key to move to the desired position. STEP7 Then press the corresponding pad while holding down the [DELETE/ERASE] key.

Recording Pattern

As you move the position with the [REPEAT/STEP] key, the LED of a pad that has been input for the current position lights up. Pressing the pad while holding the [DELETE/ERASE] key down causes the LED to go out and the sound will be erased.

[KICK] DELETE/ERASE

REPEAT/STEP

PAD

DELETE/ERASE

Recording) (Step

Drum track

Snare drum

Bass drum

Snare drum

Bass drum

NOTE During step recording, erasing the entire track is not possible.

STEP8 When recording is completed, press the [STOP/EXIT] key.

The [REC] key LED goes out, and step recording ends.

STEP9 To record drum track B, repeat steps 3 - 8.

NOTE

If step 4 is carried out without pressing the [FUNCTION] key, the

quantize value of the pattern already recorded in that track will also be changed. For example, if step recording was carried out with sixteenth notes and the quantize value was then changed to quarter notes, the pattern already recorded will also be changed to quarter notes if the [REC] key is pushed without pressing the [FUNCTION] key.

30