Zoom RT-123 STEP, STEP, STEP9 When recording is completed, press the [STOP/EXIT] key

Recording) (Step Recording Pattern

that pad is entered, and the position proceeds to the next step.

• Enter the minimum unit rest: Briefly tap the [REPEAT/STEP] key

REPEAT/STEP

and release it. A rest of the selected minimum duration is entered, and the position proceeds to the next step.

•Enter a note longer than the minimum unit: Hold the pad down and repeatedly press the [REPEAT/STEP] key. With each push of the [REPEAT/STEP] key, the immediately preceding note is extended by one unit.

PAD

Hold down

[STEP] [STEP] [STEP]

When you press a pad, its LED lights up, indicating that the note has been input. The display shows the current position in the pattern (measure/beat).

A note longer than the entire pattern cannot be input. When the NOTE input exceeds the pattern length, the note will only be as long as the

pattern.

To erase a note, use the [REPEAT/STEP] key to move to the desired position. Then STEP7 press the corresponding pad while holding down the [DELETE/ERASE] key.

As you move the position with the [REPEAT/STEP] key, the LED of
a pad that has been input for the current position lights up.		[B2]	DELETE/ERASE
Pressing the pad while holding the [DELETE/ERASE] key down
causes the LED to go out and the note will be erased.	Bass track

To decrease the length of a note, use the [REPEAT/STEP] key to move to the STEP8 position where the note should stop.

Then press the corresponding pad while holding down the	[B2]	DELETE/ERASE
[DELETE/ERASE] key.

Bass track

Note duration

NOTE During step recording, erasing the entire track is not possible.

STEP9 When recording is completed, press the [STOP/EXIT] key.

The [REC] key LED goes out, and step recording ends.

32