Settings Key FUNCTION
Setting the beat of a pattern (TIME SIG)
Setting Range: 2, 3, 4
Set the beat for the pattern to 2 (2/4 beat), 3 (3/4 beat), or 4 (4/4 beat).
Changing the beat of an already recorded pattern is also possible, but the recorded sound will change as follows. Proceed with care, especially when making the beat shorter.
■Choosing a longer beat than the current beatA blank space with the length of the additional beat is added to each measure.
■Choosing a shorter beat than the current beatThe excess duration of each measure is cut off. Once the [FUNCTION] key is pressed to accept the setting, it will not be possible to restore the
HINT | The |
the [FUNCTION] key is pressed once more to terminate the mode. |
Setting the pre-count (PRE COUNT)
Setting Range: 0, 1, 2, PAd (Default value: 1)
The
The settings have the following meaning.
0:
1:
2:
PAd: The unit goes into recording standby mode when the [PLAY] key is pressed, and recording starts when any pad is pressed.
Setting the pattern resolution (QUANTIZE)
Setting Range: 4, 8, 12, 16, 24, 32, 48, Hi (Default value: 16)
Sets the quantize value (shortest note) for the pattern. The quantize setting affects the following four functions:
•Shortest note for
•Shortest note for step recording
•Sound interval when [REPEAT/STEP] key is used together with pad for continuous repetition
•Pad push/release detection timing during groove play
The following 8 settings are available for the quantize value.
4 | ...........................Quarter note | 16 | .......................Sixteenth note | 48 | |
8 | ............................Eighth note | 24 | ............Sixteenth triplet note | Hi | ...........Quantize function off |
12 | .................Eighth triplet note | 32 |
| During step recording: | |
|
|
|
|
| 1 tick (1/96 quarter note) |
46