5Windows Vista: In the Windows needs to install driver software for your USB modem message box, select Locate and install . . .

Windows XP: At the Found New Hardware Wizard dialog box, select Install the software automatically, click Next, and follow the prompts. You may see a message regarding Windows logo testing. You can safely disregard the message and click Continue Anyway.

Windows 2000: You may see a dialog box stating that the Digital Signature was not found. You can safely ignore this message and click Yes.

6Windows Vista:

In the User Account Control message box, click Continue.

Windows XP:

In the Completing the Found New Hardware Wizard dialog box, click Finish.

A popup notification messsage tells you that your new hardware is successfully installed.

7Connect the supplied phone cord to the phone jack on the modem. Plug the other end of the cord into the wall jack just as you would a telephone.

Finally, confirm that the installation was successful

1Open Control Panel (Vista: select Printers and Other Hardware) and double-click the Phone and Modem Options icon.

2Enter your Location information and then click the Modems tab.

3On the Modems tab, where you see that the USB modem is installed, click the Properties button.

4In the USB Modem Properties dialog box, click the Modem tab and verify that the Maximum Port Speed is set to 115,200.

7