ZyXEL Communications 100WH quick start Windows 95 Quick Start, TCP/IP Installation

Prestige 100WH Quick Start Guide

Chapter 3

Windows 95 Quick Start

This chapter shows you the step-by-step instructions to configure your Windows 95 workstations for Internet access.

3.1TCP/IP Installation

You must first install TCP/IP protocol on each Windows 95 workstation before you can use it to access the Internet. If you have already installed TCP/IP, skip to the TCP/IP Configuration section on page 9; otherwise, follow these steps:

Step 1. From the Start Menu, select Settings then open Control Panel.

Step 2. Double-click the Network icon to open the Network control panel.

Step 3. Click the Add button in the Network control panel to add a new protocol.

9