ENGLISH

3 Connecting the Hardware

Make sure that the power switch on the rear panel is turned off before you make the hardware connections.

1It is recommended that you configure the ZyWALL before using it to protect your network. Use an Ethernet cable to connect a computer to port 1.

2Use another Ethernet cable(s) to connect port 2 and/or port 3 to an Ethernet jack with Internet access.

3Use the included power cord to connect the power socket on the rear panel to a power outlet.

4Push the power switch to the on position and look at the front panel. The PWR light turns on. The SYS light blinks during system testing and initialization and then stays on when the system is ready.

4 Web Login

1Launch your web browser and go to http://192.168.1.1 (the ZyWALL automatically redirects you to https://192.168.1.1).

3