ENGLISH

Port

Interface

Zone

IP Address and DHCP Settings

Suggested Use With Default Settings

1

ge1

LAN

192.168.1.1, DHCP server enabled

Protected LAN

 

 

 

 

 

2, 3

ge2, ge3

WAN

DHCP clients

Connections to the Internet

 

 

 

 

 

4, 5

ge4, ge5

DMZ

None, DHCP server disabled

Public servers (such as web, e-mail and

 

 

 

 

FTP)

 

 

 

 

 

DIAL BACKUP

aux

None

None

Auxiliary modem

 

 

 

 

 

CONSOLE

N/A

None

None

Local management

 

 

 

 

 

Label

Type

Cable to Use

1~5

RJ-45

8-wire Category 5e or above Ethernet cable

 

 

 

DIAL BACKUP, CONSOLE

RS-232

RS-232

 

 

 

Note: The USB ports, extension card slots, and hard disk slot are reserved for future use.

7 Troubleshooting

Problem

Corrective Action

None of the LEDs

Make sure that you have the power cord connected to the ZyWALL and plugged in to an

turn on.

appropriate power source. Make sure you have the ZyWALL turned on. Check all cable

 

connections.

 

 

 

If the LEDs still do not turn on, you may have a hardware problem. In this case, you should

 

contact your local vendor.

 

 

7