ZyWALL 10~100 Series Internet Security Gateway

Chapter 10

Firewall Commands

The following describes the firewall commands. See the Command Interpreter appendix for information on the command structure.

Chart 10-1 Firewall Commands

FUNCTION

COMMAND

DESCRIPTION

Firewall

 

 

Set-Up

 

 

 

config edit firewall active

This command turns the firewall on or off.

 

<yes no>

 

 

config retrieve firewall

This command returns the previously saved

 

 

firewall settings.

 

config save firewall

This command saves the current firewall

 

 

settings.

Display

 

 

 

config display firewall

This command shows the of all the firewall

 

 

settings including e-mail, attack, and the sets/

 

 

rules.

 

config display firewall set

This command shows the current

 

<set #>

configuration of a set; including timeout

 

 

values, name, default-permit, and etc.

 

 

If you don’t put use a number (#) after “set”,

 

 

information about all of the sets/rules appears.

 

config display firewall set

This command shows the current entries of a

 

<set #> rule <rule #>

rule in a firewall rule set.

Firewall Commands

10-1