ZyWALL 10~100 Series Internet Security Gateway

Chart 10-1 Firewall Commands

FUNCTIONCOMMAND

config edit firewall set <set #> rule <rule #> TCP destport- single <port #>

config edit firewall set <set #> rule <rule #> TCP destport- range <start port #> <end port #>

config edit firewall set <set #> rule <rule #> UDP destport- single <port #>

config edit firewall set <set #> rule <rule #> UDP destport- range <start port #> <end port #>

Delete

config delete firewall e-mail

config delete firewall attack

config delete firewall set <set #>

DESCRIPTION

This command sets a rule to have the ZyWALL check for TCP traffic with this destination address. You may repeat this command to enter various, non-consecutive port numbers.

This command sets a rule to have the ZyWALL check for TCP traffic with a destination port in this range.

This command sets a rule to have the ZyWALL check for UDP traffic with this destination address. You may repeat this command to enter various, non-consecutive port numbers.

This command sets a rule to have the ZyWALL check for UDP traffic with a destination port in this range.

This command removes all of the settings for e-mail alert.

This command resets all of the attack response settings to their defaults.

This command removes the specified set from the firewall configuration.

Firewall Commands

10-7