P-2002 Series User’s Guide

APPENDIX E

Internal SPTGEN

Internal SPTGEN Overview

Internal SPTGEN (System Parameter Table Generator) is a configuration text file useful for efficient configuration of multiple Prestiges. Internal SPTGEN lets you configure, save and upload multiple menus at the same time using just one configuration text file – eliminating the need to configure each Prestige.

The Configuration Text File Format

All Internal SPTGEN text files conform to the following format:

<field identification number = field name = parameter values allowed = input>,

where <input> is your input conforming to <parameter values allowed>.

The figure shown next is an example of an Internal SPTGEN text file.

Figure 68 Configuration Text File Format: Column Descriptions

/ Menu 1 General Setup

 

 

10000000

= Configured

<0(No) 1(Yes)>

= 1

10000001

= System Name

<Str>

= Prestige

10000002

= Location

<Str>

=

10000003

= Contact Person’s Name

<Str>

=

10000004

= Route IP

<0(No) 1(Yes)>

= 1

10000005

= Route IPX

<0(No) 1(Yes)>

= 0

10000006

= Bridge

<0(No) 1(Yes)>

= 0

Note: DO NOT alter or delete any field except parameters in the Input column.

Internal SPTGEN File Modification - Important Points to Remember

Each parameter you enter must be preceded by one “=”sign and one space.

Some parameters are dependent on others. For example, if you disable the Configured field in menu 1 (see Figure 68 on page 133), then you disable every field in this menu.

Appendix E

133