4.3 Configuring the Ethernet Management Port
Click ETHERNET in the navigation panel and then Mgnt Port to open the following screen. Use the ETHERNET Mgnt Port screen to configure a static IP address through which you can manage the Prestige.
Note: The management port is a separate logical Ethernet interface that you can access from a computer connected to either of the Prestige’s physical Ethernet interfaces.
Figure 13 ETHERNET Mgnt Port
The following table describes the labels in this screen.
Note: The management port’s subnet mask is fixed at 255.255.255.0.
Table 9 ETHERNET Mgnt Port
LABEL | DESCRIPTION |
|
|
IP Address | Type the (static) IP address through which to manage the Prestige. This |
| management IP address can be on a different subnet from the Ethernet port’s IP |
| address, but the computer you use for management must be on the same subnet |
| as this management IP address. |
Apply | Click Apply to save your changes back to the Prestige. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
44 | Chapter 4 Ethernet Screens |