Figure 9 System General
Table 4 System General
LABEL | DESCRIPTION |
|
|
System Name | This is for identification purposes. Enter your computer's "Computer Name". |
|
|
Domain Name | The Domain Name entry is what is propagated to the DHCP clients on the LAN. If |
| you leave this blank, the domain name obtained by DHCP from the ISP is used. |
Administrator | Type how many minutes a management session can be left idle before the session |
Inactivity Timer | times out. The default is 5 minutes. After it times out you have to log in with your |
| password again. Very long idle timeouts may have security risks. A value of "0" |
| means a management session never times out, no matter how long it has been left |
| idle (not recommended). |
Apply | Click Apply to save your changes back to the Prestige. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
3.4 Configuring Password
To change your Prestige’s password (recommended), click SYSTEM in the navigation panel, and then the Password tab. The screen appears as shown. This screen allows you to change the Prestige’s password.
Figure 10 PasswordThe following table describes the labels in this screen.
36 | Chapter 3 System Screens |