ZyXEL Communications 662HW manual 36

	Prestige 662HW Series Compact Guide
The following table describes the labels in this screen.
	Table 8 Firewall: Edit Rule
LABEL	DESCRIPTION
Active	Select this option to enable this firewall rule.
Action for	Use the radio button to select whether to discard (Block) or allow the
Matched	passage of (Forward) packets that match this rule.
Packet
Source/Destination Address
Address	Do you want your rule to apply to packets with a particular (single) IP, a
Type	range of IP addresses (e.g., 192.168.1.10 to 192.169.1.50), a subnet or
	any IP address? Select an option from the drop-down list box that
	includes: Single Address, Range Address, Subnet Address and Any
	Address.
Start IP	Enter the single IP address or the starting IP address in a range here.
Address
End IP	Enter the ending IP address in a range here.
Address
Subnet Mask	Enter the subnet mask here, if applicable.
Add	Click Add to add a new address to the Source or Destination Address
	box. You can add multiple addresses, ranges of addresses, and/or
	subnets.
Edit	To edit an existing source or destination address, select it from the box
	and click Edit.
Delete	Highlight an existing source or destination address from the Source or
	Destination Address box above and click Delete to remove it.
Services
Available/	Please see User’s Guide for more information on services available.
Selected	Highlight a service from the Available Services box on the left, then click
Services	Add>> to add it to the Selected Services box on the right. To remove a
	service, highlight it in the Selected Services box on the right, then click
	Remove.
Available	Click the Available Services link to bring up the screen that you use to
Service	configure a new custom service that is not in the predefined list of
	services.

36