| Prestige 662HW Series Compact Guide | |
| Table 1 Rear Panel Description | |
|
| |
LABEL | DESCRIPTION | |
|
| |
CON/AUX | Only connect this port if you want to configure the Prestige using the | |
switch | SMT via console port see your User's Guide for details. | |
CON/AUX | Set this switch to the CON side to use the CON/AUX port as a console | |
port | ||
port for local device configuration and management. Connect the | ||
| ||
| end of the console cable to the console port of the Prestige and the | |
| other end to a serial port (COM1, COM2 or other COM port) on your | |
| computer. Your computer should have a terminal emulation | |
| communications program (such as HyperTerminal) set to VT100 | |
| terminal emulation, no parity, 8 data bits, 1 stop bit, no flow control and | |
| 9600 bps port speed. | |
| The console port is also an auxiliary WAN port. Push the CON/AUX | |
| switch to AUX and connect the CON/AUX port to your modem or TA. | |
RESET | You only need to use this button if you’ve forgotten the Prestige’s | |
| password. It returns the Prestige to the factory defaults (password is | |
| 1234, LAN IP address 192.168.1.1 etc.; see your User’s Guide for | |
| details). | |
|
|
2.2 The Front Panel LEDs
Figure 2 Front Panel
Refer to the following table for more detailed LED descriptions.
Table 2 Front Panel LED Description
LED | COLOR | STATUS | DESCRIPTION |
|
|
|
|
PWR/SYS | Green | On | The Prestige is receiving power and functioning |
|
|
| properly. |
|
|
|
|
5