Prestige 662HW Series Compact Guide

Table 2 Front Panel LED Description

LED

COLOR

STATUS

DESCRIPTION

 

 

 

 

CON/AUX

Green

On

The CON/AUX switch is set to CON, the CON/AUX

 

 

 

port is connected to a management computer and

 

 

 

someone is logged into the Prestige.

 

 

 

 

 

Orange

On

The CON/AUX switch is set to AUX and the

 

 

 

CON/AUX port has an Internet connection through

 

 

 

a dial-up modem.

 

 

 

 

 

 

Blinking

The CON/AUX switch is set to AUX and the

 

 

 

CON/AUX port is sending or receiving data through

 

 

 

a dial-up modem or ISDN TA.

 

 

 

 

 

 

Off

The CON/AUX link is not ready, or has failed.

 

 

 

 

3 Internet Access With Zero Configration

With the Prestige’s Zero Configuration, you can access the Internet easily. Simply connect a computer to the Prestige and access the Internet without changing the network settings (such as the IP address and subnet mask) of the computer.

Step 1. Make the hardware connections and turn on the Prestige (refer to the Rear Panel Connections section).

Step 2. Wait until the DSL/ACT LED turns steady on. Launch your web browser and navigate to a web site (for example, www.zyxel.com). The Prestige automatically detects and configures your Internet connection. This may take about two minutes.

Step 3. If you have a PPPoE or PPPoA connection type, a screen displays prompting you to enter your Internet account username and/or password. Enter the username, password and/or service name exactly as provided by your ISP. Click Apply.

7