ZyXEL Communications A-6000 System Configuration, Description, User Name, Wireless Configuration

System Configuration	Description
User Name	Specifies the user name.
Password	Specifies the password.
Telnet Enable	Use the checkbox to allow telneting into the
	system.
Access Control	Specifies the MAC address allowed to join.

Wireless Configuration	Description
SSID	Identification of the BU. Enter a number or
	address between 1 and 32 characters in length
	that the RU is associating with. Use the System
	Name field to uniquely identify each BU..
Country	Display country name; it’s related to channel
	frequency base.
RF Channel Frequency	Select the desired frequency of operation from
	the drop-down menu, or choose SmartSelect.
	The radio frequencies that appear in the Radio
	Channel drop-down menu are dependent on
	the wireless mode selection. Select
	“SmartSelect” to automatically search through
	the frequency list to find a used or less
	congested channel. It only works on AP
	system. AC will scan the right channel.
Data Rate (Mbps)	Specifies rate of data transmission. Select the
	desired rate from the drop-down menu. The
	Best selection will adapt the rate to the best
	available. Value unit in Mega bit per second
Transmit Power	Specifies the level of transmit power. Choose
	the value of the transmit power from the
	dropdown menu. Decrease the transmit power
	if more than one AP is co-located using the
	same channel frequency. Maximum transmit
	power depends on channel frequency. In
	selected item, ‘Full’ means maximum transmit
	power; ‘Half’ means Full – 3dB; ‘Quarter’
	means Full –6dB; ‘Eighth’ means Full –9dB;
	and ‘Minimum’ means 0dB.
Beacon Interval (20 - 1000)	Specifies the beacon interval value. Enter a
	value between 20 and 1000. It only works on
	AP system.
Data Beacon Rate (1 - 255)	Specifies the Data Beacon Rate. Enter a value
	between 1 and 255 that specifies the delivery
	traffic indication message (DTIM). It only works
	on AP system.

11