Chapter 3 Hardware Overview
3The switch automatically detects the installed transceiver. Check the LEDs to verify that it is functioning properly.
Figure 10 Installed Transceiver
3.1.2.2 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module).
1Open the transceiver’s latch (latch styles vary).
Figure 11 Opening the Transceiver’s Latch Example
2Pull the transceiver out of the slot.
Figure 12 Transceiver Removal Example
3.2 The RESET Button
The switch allows you to reset the switch to its factory default configuration via the RESET button. Press the RESET button for one second and release. The switch automatically reboots and reloads its factory default configuration file.
| 37 |
|
|