6
Port Settings
This chapter describes how to view and configure the port settings on the switch.
6.1 Port Status
Use this screen to view switch port settings. Click System > Port in the navigation panel to display the Port Status screen.
Figure 27 Port Status
The following table describes the labels in this screen.
Table 8 Port Status
LABEL | DESCRIPTION |
Refresh | Click this to update the PORT Status screen. |
|
|
Port | This identifies the Ethernet port. Click a port number to display the Port |
| Configuration screen (refer to Section 6.2 on page 56.) |
|
|
Link Status | This field displays the link status of the port. Up, if the port is enabled and active or |
| Down, if the port is disabled or not connected to any device. |
|
|
Speed Duplex | This field displays the speed either 10Mbps, 100Mbps or 1000Mbps and the duplex |
| mode Full or Half. |
| 55 |
|
|