Chapter 11 QoS
Figure 40 ToS Based QoS
The following table describes the labels in this screen.
Table 20 ToS Based QoS
LABEL | DESCRIPTION |
Mode | Select ToS Based QoS to specify mapping rules between ToS priority and IEEE 802.1p |
| priority for incoming packets on the switch. |
|
|
Change | Configure the following: |
Priority | • TOS - Select the ToS priority for which you want to change a priority mapping. |
| • Priority - Select the IEEE 802.1p priority you want to assign to the packets with the |
| ToS priority you specified in the TOS field. |
| Click Change to view your changed settings. |
| Note: The changes are not applied until you click Apply Change |
| Settings. |
|
|
TOS, | This is a summary table of your ToS priority to IEEE 802.1p priority mappings. The TOS |
Priority | column indicates the ToS priority of the incoming packets and the Priority column |
| indicates what IEEE 802.1p priority gets assigned to those packets. |
|
|
Apply | Click this when you have reviewed the changes you want to make and you want to save |
Change | them to the switch’s memory. |
Settings |
|
11.4.6 IP Address Based QoS
You can configure the switch to assign a higher priority to packets coming into the switch from specific IP addresses. Select IP Address Based QoS in the QoS Enhancement Setting screen to view the following screen.
| 77 |
|
|