ZyXEL Communications G-170S Connect, Link Info, Security Settings

ZyXEL G-170S User’s Guide

Figure 7 ZyXEL Utility: Site Survey

4To join a network, either click an SSID in the table and then click Connect or double- click an SSID.

5If the wireless security is activated for the selected wireless network, the Security Settings screen displays. This screen varies according to the network’s encryption method. Configure the same security settings as the associated network.

Note: If the selected network is unavailable or security settings are not correct, the G- 170S then automatically connects to an available network without security.

Figure 8 ZyXEL Utility: Security Settings

6Verify that you have successfully connected to the selected network and check the network information in the Link Info screen. If the G-170S is not connected to a network, the fields in this screen are blank.

24	Chapter 1 Getting Started

Contents

User’s Guide Page Copyright Disclaimer Trademarks Federal Communications Commission (FCC) Interference Statement Notice Caution Certifications ZyXEL Limited Warranty Note Online Registration Customer Support Page Table of Contents ZyXEL Utility Configuration Maintenance Troubleshooting Appendix A Product Specifications Page Page List of Figures Page List of Tables Page Preface About This User's Guide Related Documentation User Guide Feedback Syntax Conventions Graphics Icons Key Getting Started 1.1 About Your G-170S 1.1.1Application Overview 1.1.1.1 Infrastructure 1.1.1.2 Ad-Hoc 1.2 G-170SHardware and Utility Installation 1.3 Configuration Methods 1.4 Windows XP Users Only 1.5 Accessing the ZyXEL Utility 1.6 ZyXEL Utility Screen Summary 1.7 Connecting to a Wireless LAN 1.7.1 Site Survey Security Settings Link Info Page Page Wireless LAN Network 2.1 Wireless LAN Overview 2.1.1 SSID 2.1.2 Channel 2.1.3 Transmission Rate (Tx Rate) 2.2 Wireless LAN Security Overview 2.2.1 Data Encryption with WEP 2.2.2IEEE 2.2.2.1 EAP Authentication 2.2.3 WPA(2) 2.2.3.1 Encryption 2.2.3.2 User Authentication 2.2.4 WPA(2)-PSKApplication Example 2.2.5 WPA(2) with RADIUS Application Example 2.3 Authentication Type 2.4 Preamble Type ZyXEL Utility Configuration 3.1 The Link Info Screen 3.1.1 Trend Chart 3.2 The Site Survey Screen 3.2.1 Connecting to a WLAN Network 3.2.2Security Settings 3.2.2.1 WEP Encryption 3.2.2.2 WPA/WPA2 3.2.2.3 WPA-PSK/WPA2-PSK 3.2.2.4 IEEE 3.2.3 Confirm Save Screen 3.3 The Profile Screen 3.3.1 Adding a New Profile Page Ad-Hoc WPA WPA2 WPA-PSK WPA2-PSK DISABLE Save Activate Now Activate Later 3.4 The Adapter Screen Page Page Maintenance 4.1 The About Screen 4.2 Uninstalling the ZyXEL Utility 4.3 Upgrading the ZyXEL Utility Page Page Troubleshooting 5.1 Problems Starting the ZyXEL Utility 5.2 Problem with the Link Quality 5.3 Problems Communicating With Other Computers APPENDIX A Page Activating Wireless Zero Configuration Connecting to a Wireless Network Properties Wireless Networks Wireless Network Connection Properties Refresh network list Refresh Available networks Configure Preferred Wireless Network Connection Security Settings Association Authentication Authentication Properties Smart Card or other Certificate Properties Ordering the Preferred Networks Wireless Networks Move up Move down Remove Page EAP-MD5 (Message-DigestAlgorithm 5) EAP-TLS(Transport Layer Security) EAP-TTLS(Tunneled Transport Layer Service) PEAP (Protected EAP) LEAP Dynamic WEP Key Exchange WPA(2) Encryption User Authentication WPA(2)-PSKApplication Example WPA(2) with RADIUS Application Example Security Parameters Summary Numerics Index