ZyXEL Communications G-170S Next, Ad-Hoc, Infrastructure

		ZyXEL G-170S User’s Guide
Table 12	Profile: Add New Profile (continued)
LABEL		DESCRIPTION
Scan		Click Scan to search for available wireless devices within transmission range.
Select		Select an available wireless device in the table and click Select to add it to this
		profile.
		Whenever you activate this profile, the G-170S associates to the selected wireless
		network only.

2If you select the Infrastructure network type in the previous screen, skip to step 3. If you select the Ad-Hocnetwork type in the previous screen, a screen displays as follows. Select a channel number and wireless LAN mode and click Next to continue.

Figure 22 Profile: Wireless Setting: Select a Channel

The following table describes the labels in this screen.

Table 13 Profile: Wireless Setting: Select a Channel

LABEL	DESCRIPTION
Wireless Setting
Wireless Mode	Select 802.11g to have the G-170S connect to an IEEE 802.11g wireless device
	only and vice versa.
	Select 802.11b to have the G-170S connect to an IEEE 802.11b wireless device
	only and vice versa.
Channel	Select a channel number from the drop-down list box. To associate to an ad-hoc
	network, you must use the same channel as the peer computer.
Back	Click Back to return to the Add New Profile screen.
Next	Click Next to confirm your selection and advance to the Encryption Type screen.
Exit	Click Exit to discard changes and return to the Add New Profile screen.

Chapter 3 ZyXEL Utility Configuration 45