ZyXEL
The following table describes the labels in this screen.
Table 7 Security Settings: WPA/WPA2
LABEL | DESCRIPTION |
|
|
Encryption Type | The encryption mechanisms used for WPA/WPA2 and |
| the same. The only difference between the two is that |
| a simple common password, instead of |
| Select the encryption type (TKIP or AES) for data encryption. |
| Refer to Section 2.2.3 on page 29 for more information. |
|
|
Authentication | Select an authentication method from the drop down list. Options are TLS, TTLS |
Type | and PEAP. |
Login Name | Enter a user name. |
| This is the user name that you or an administrator set up on a WPA/WPA2 server. |
|
|
Password | This field is not available when you select TLS in the Authentication Type field. |
| Enter the password associated with the user name above. |
|
|
Certificate | This field is only available when you select TLS in the Authentication Type field. |
| Select a certificate used by the authentication server to authenticate the |
| Note: You must first have a wired connection to a network and |
| obtain the certificate(s) from a certificate authority (CA). |
Server CA | Select a certificate authority (CA) that you trust and accept any certificates signed |
| by the CA. |
| Otherwise, select Trust Any to accept certificates from any CA. |
|
|
PEAP Inner EAP | This field is only available when you select PEAP in the Authentication Type |
| field. |
| Select a PEAP protocol. Options are GTC and MS CHAP v2. |
|
|
Back | Click Back to go to the Site Survey screen to select and connect to other network. |
|
|
Next | Click Next to confirm your selections and advance to the Confirm Save screen. |
| Refer to Section 3.2.3 on page 41. |
Exit | Click Exit to return to the Site Survey screen without saving. |
|
|
3.2.2.3 WPA-PSK/WPA2-PSK
Note: WPA2 and
Figure 17 Security Settings:
Chapter 3 ZyXEL Utility Configuration | 39 |