|
| ZyXEL |
| Table 9 Security Settings: 802.1x | |
|
|
|
| LABEL | DESCRIPTION |
|
|
|
| Server CA | Select a certificate authority (CA) that you trust and accept any certificates signed |
|
| by the CA. |
|
| Otherwise, select Trust Any to accept certificates from any CA. |
|
|
|
| PEAP Inner EAP | This field is only available when you select PEAP in the Authentication Type |
|
| field. |
|
| Select a PEAP protocol. Options are GTC and MS CHAP v2. |
|
|
|
| Back | Click Back to go to the Site Survey screen to select and connect to other network. |
|
|
|
| Next | Click Next to confirm your selections and advance to the Confirm Save screen. |
|
| Refer to Section 3.2.3 on page 41. |
| Exit | Click Exit to return to the Site Survey screen without saving. |
|
|
|
3.2.3 Confirm Save Screen
Use this screen to confirm and save the security settings.
Figure 19 Confirm Save Screen
The following table describes the labels in this screen.
Table 10 Confirm Save Screen
LABEL | DESCRIPTION |
|
|
Network Name | This field displays the SSID previously entered. |
(SSID) |
|
Network Type | This field displays the network type (Infrastructure or Ad Hoc) of the wireless |
| device. |
Network Mode | This fields displays the network standard (802.11g, 802.11b or 802.11b/g) of the |
| wireless device. |
Chapter 3 ZyXEL Utility Configuration | 41 |