ZyXEL G-220 v3 User’s Guide

3.4.2 Starting OTIST

Note: You must click Start in the AP OTIST web configurator screen and in the wireless client(s) Adapter screen all within three minutes (at the time of writing). You can start OTIST in the wireless clients and AP in any order but they must all be within range and have OTIST enabled.

See the user’s guide for more information.

1In the AP, a web configurator screen pops up showing you the security settings to transfer. After reviewing the settings, click OK.

2This screen appears while OTIST settings are being transferred. It closes when the transfer is complete.

•In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the same Setup key). Click OK to go back to the ZyXEL utility main screen.

•If there is more than one OTIST-enabled AP within range, you see a screen asking you to select one AP to get settings from.

3.4.3Notes on OTIST

1If you enabled OTIST in the wireless client, you see this screen each time you start the utility. Click Yes for it to search for an OTIST-enabled AP.

2If an OTIST-enabled wireless client loses its wireless connection for more than ten seconds, it will search for an OTIST-enabled AP for up to one minute. (If you manually have the wireless client search for an OTIST-enabled AP, there is no timeout; click Cancel in the OTIST progress screen to stop the search.)

Chapter 3 Wireless LAN Network

49