ZyXEL G-220 v3 User’s Guide

Table 14 Station Mode: Adapter (continued)

LABEL

DESCRIPTION

 

 

Power Saving

Select Maximum Power Save or Fast Power Save to save power (especially for

Mode

notebook computers). This forces the G-220 v3 to go to sleep mode when it is not

 

transmitting data.

 

When you select Continuous Access Mode, the G-220 v3 will never go to sleep

 

mode.

 

Note: At the time of writing this field is not available on Windows

 

Vista.

WMM QoS

WMM (Wi-Fi MultiMedia) QoS (Quality of Service) allows you to prioritize wireless

 

traffic according to the delivery requirements of individual services. To do this, you

 

must enable WMM QoS on both the AP and wireless clients.

 

Select this check box to enable WMM QoS on the G-220 v3.

 

Note: At the time of writing this field is not available on Windows

 

Vista.

WPS (Wi-Fi

Select this to enable Wi-fi Protected Setup on the G-220 v3.

Protected Setup)

 

PBC

Select this to use the PBC (Push-Button Configuration) WPS mode. When you use

 

the PBC mode you do not use a PIN.

PIN

Select this to use the PIN (Personal Identification Number) WPS mode. Use this

 

option when you want to enter the G-220 v3’s PIN in another WPS-enabled device.

 

The PIN will be displayed in the field on the right. Click PIN again to generate a

 

new PIN.

Manual Input

Select this check box to manually enter the PIN into the field on the right. This

 

could be a PIN from another WPS-enabled device or a PIN you will type into the

 

other WPS-enabled device.

Start

Click Start once you have selected the PBC or PIN settings. A screen will appear

 

that states the WPS is in progress. You must now start WPS on the other WPS-

 

enabled device within two minutes or the connection will time out. If the two WPS

 

devices connect you will receive a successful connection message.

OTIST (One-

Select this check box to enable OTIST.

Touch Intelligent

 

Security

 

Technology)

 

Setup Key

Enter the same setup key (up to eight printable characters) as the ZyXEL AP or

 

wireless router to which you want to associate. The default OTIST setup key is

 

"01234567".

 

Note: If you change the OTIST setup key on the ZyXEL AP or

 

wireless router, you must also make the same change here.

Start

Click Start to encrypt the wireless security data using the setup key and have the

 

ZyXEL AP or wireless router set your G-220 v3 to use the same wireless settings

 

as the ZyXEL AP or wireless router. You must also activate and start OTIST on the

 

ZyXEL AP or wireless router all within three minutes.

Save

Click Save to save the changes back to the G-220 v3 and return to the Link Info

 

screen.

70

Chapter 4 Wireless Station Mode Configuration