ZyXEL G-220 v3 User’s Guide

Table 12 Station Mode: Profile: Add a New Profile (continued)

LABEL

DESCRIPTION

 

 

Network Type

Select Infrastructure to associate to an AP. Select Ad-Hocto associate to a peer

 

computer.

Next

Click Next to go to the next screen.

 

 

Exit

Click Exit to go back to the previous screen without saving.

 

 

Scan Info

This table displays the information of the available wireless networks within the

 

transmission range.

 

denotes that the wireless device is in infrastructure mode and the wireless

,

security is activated.

denotes that the wireless device is in infrastructure mode but the wireless

 

,

security is deactivated.

or

denotes that the wireless device is in Ad-Hoc mode and the wireless

 

security is activated.

 

denotes that the wireless device is in Ad-Hoc mode but the wireless security

 

is deactivated.

SSID

This field displays the SSID (Service Set IDentifier) of each AP or peer device.

 

 

Scan

Click Scan to search for available wireless devices within transmission range.

 

 

Select

Select an available wireless device in the table and click Select to add it to this

 

profile.

 

Whenever you activate this profile, the G-220 v3 associates to the selected

 

wireless network only.

•If you select the Infrastructure network type in the previous screen, skip to the next step. If you select the Ad-Hocnetwork type in the previous screen, a screen displays as follows. Select a channel number and wireless LAN mode and click Next to continue.

Note: To associate to an ad-hoc network, you must use the same channel as the peer computer.

Note: At the time of writing the Ad-hoc channel and wireless mode select is not available on Windows Vista.

Chapter 4 Wireless Station Mode Configuration

65