ZyXEL G-220 v3 User’s Guide

CHAPTER 5

Access Point Mode

Configuration

This chapter shows you how to configure your G-220 v3 in access point mode.

5.1 Access Point Mode Introduction

To set your G-220 v3 as an Access Point (AP), select AP Mode in any utility screen (refer to Section 1.2.4 on page 25).

In access point mode, your G-220 v3 functions as an access point. This allows you to set up your wireless networks without using a dedicated AP.

Note: At the time of writing this function is not available on Windows Vista.

5.1.1 ZyXEL Utility Screen Summary

This section describes the ZyXEL utility screens when the G-220 v3 is in AP mode.

Figure 47 ZyXEL Utility Menu Summary: AP Mode

The following table describes the menus.

Table 15 ZyXEL Utility Menu Summary: AP Mode

TAB

DESCRIPTION

 

 

AP Mode

 

 

 

Link Info

Use this screen to see your current connection status, configuration and data rate

 

statistics.

Configuration

Use this screen to configure wireless LAN settings.

 

 

MAC Filter

Use this screen to configure which computer(s) you want access to the wireless

 

LAN through the G-220 v3.

Chapter 5 Access Point Mode Configuration

75