ZyXEL G-220 v3 User’s Guide

Figure 37 Station Mode: Profile: Select a Channel

The following table describes the labels in this screen.

Table 13 Station Mode: Profile: Select a Channel

LABEL

DESCRIPTION

 

 

Wireless Settings

 

 

 

Channel

Select a channel number from the drop-down list box. To associate to an ad-hoc

 

network, you must use the same channel as the peer computer.

Wireless Mode

Select Mixed Mode to have the G-220 v3 connect to either an IEEE 802.11g or

 

IEEE 802.11b wireless device.

 

Select G Only to have the G-220 v3 connect to an IEEE 802.11g wireless device

 

only and vice versa.

 

Select B Only to have the G-220 v3 connect to an IEEE 802.11b wireless device

 

only and vice versa.

•If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2, WPA-PSK, WPA2-PSKor 802.1x from the drop-down list box to enable data encryption. If you select Ad-Hocnetwork type in the first screen, you can only use WEP encryption method. Otherwise, select DISABLE to allow the G-220 v3 to communicate with the access points or other peer wireless computers without any data encryption.

66

Chapter 4 Wireless Station Mode Configuration