ZyXEL Communications IES-708-22 user service Hardware Specifications

VoIP Features

•Codes: G.711, G.726, G.729a/b, G.723.1

•Network signaling protocols: ITU-T H.248 v2, SIP v2 (RFC3261)

•RTP (RFC 1889)

•RTCP (RFC 1890)

•FAX/Modem pass through (T.38) via RTP

•Tone detection and generation (bi-directional)- RFC2833 RTP Payload for DTMF

•Echo cancellation and auto gain control (G.165, G.168)

•VAD (Voice Activity Detection)

•CNG (Comfort Noise Generation)

•Caller ID generation and detection

•Supplementary services

•Local dial available

•Emergency call local route

•Do not disturb

•Selective/anonymous call rejection

•Call waiting

•Call transfer (blind and attended transfer)

•Call return and call back on busy

•Off hook warning tone

Network Management

•Local management through a craft terminal

•Web-based management interface

•Cluster management (up to 8 cluster members)

•View-based network management

•Support XML-based North Bound Interface NetAtlas Access EMS

•In-band and out-of-band IP interface for management (SSH, SFTP)

•SNMP management (through ZyXEL NetAtlas Access EMS)

-SNMPv1/v2c/v3 agent/traps

-Standard MIBs

RFC 1213 MIB II

ADSL line MIB (RFC2662)/extension line MIB (RFC 3440)

SHDSL line MIB (RFC 3276)

VDSL line MIB (RF3728)

Bridge MIB/extension MIB

RMON MIB (RFC 1757)

-Vendor specific MIBs, e.g.,

Chassis management MIB (fan speed, voltage, temperature)

Hardware Specifications

IES-6000M

•17-slot rack mountable enclosure, 19” or 23” chassis

•Maximum 16 slots for DSL line cards (slot 1 ~ 7, 8 or 9, 10 ~ 17)

•2 slots for management and switch cards (slot 8 & 9)

•2 DC power input module and filter

•One FAN and dust filter module

•One alarm module

ALC1248G-51/ALC1272G-51

•Hot swappable 48-port/72-port ADSL2/ADSL2+ Annex A line card

•Maximum transmission rate up to 25 Mbps/ 2.4 Mbps for ADSL2+

•One mini-RJ11 console port

•One gigabit backplane

•Support G.992.3 and G.992.5 spectral mask

•Support EOC and overhead channel access defined in G.992.3 and Rec.G.997.1

•Support the latency path function specified in G.992.3 and G.992.5

•Support Annex L and Annex M specified in G.992.3 and G.992.5

•Support loop diagnostic function specified in G.992.3 and G.992.5

•Support the power management capability specified in G.992.3 and G.992.5

•Support the capability of the seamless rate Adaptation (SRA) on-line configuration specified in G.992.3 and G.992.5

•Support ADSL2+ 2-port bonding (G.998.1)

ALC1248G-53

•Hot swappable 48-port ADSL2/ADSL2+ Annex B line card

•Support Annex M and Annex L specified in G.992.3 and G.992.5

•Maximum transmission rate up to 25 Mbps/ 2.4 Mbps for ADSL2+

•One mini-RJ11 console port

•One gigabit backplane

SLC1248G-22

•Hot swappable 48-port SHDSL/SHDSL.bis line card

•Support ETSI TS 101 524 V 1.2.1, ITU-T G.991.2, ITU-T G.991.2.bis

•ATM-based multi-pair bonding (G.998.1) up to 8 ports

•Symmetric transmission rate of 5.69 Mbps/port

•One mini-RJ11 console port

•One gigabit backplane

VLC1324G-51/VLC1324G-53/ VLC1348G-51

•Hot swappable 24-port/48-port VDSL2 line card over POTS and over ISDN

•Support G.993.2, G.994.1, G.997.1

•Maximum transmission rate up to 100 Mbps/ 50 Mbps

•One mini-RJ11 console port

•Two gigabit backplane

•Support VDSL2 profiles 8a, 8b, 8c, 8d, 12a, 12b and 17a

•Support frequency allocation bandplan 998 and 997

•Support U0 band, customer PSD, RFI notch, single latency in PTM mode and INP

•Support UPBO and DPBO, reed solomon and trellis coding

•Support ADSL fall back with ADSL/ADSL2/ ADSL2+ CPE in Annex A, M, L modes

•Support IEEE 802.1ag Connectivity Fault Management (CFM)

ELC1220G-55

•Support 20 open slots for Fast Ethernet SFP (100Base-FX/BX/LX/EX)

•One mini-RJ-11 console

•Aggregates layer-2 traffic from Fast Ethernet subscribers to the chassis system

•Support multicast VLAN, IGMP snooping, IGMP filter and static multicast functions for MoD services

•Support DHCP relay, option82 and snooping functions

•Support ACL, anti-IP address spoofing and anti- MAC address spoofing security functions